Logo print

title
title

RCCB DX3 2 pole 100A type AC 30mA screw terminals

DX3 Legrand

RCCB DX3 2 pole 100A type AC 30mA screw terminals

REF. 411508 EAN numurs. 3245064115087

Protects persons against direct and indirect contacts, and electric shock hazard. Provides protection against fire hazards due to a persistent earth fault current. Can also be used to control and isolate the installation.

Lejupielādēt produktu
95,76 €
Ieteicamā cena Bez PVN
Jūs varat salīdzināt tikai 4 produktus, lai pievienotu šo produktu, jums ir jānoņem 1.

Pamatapraksts:

Protects persons against direct and indirect contacts, and electric shock hazard. Provides protection against fire hazards due to a persistent earth fault current. Can also be used to control and isolate the installation.

Produkta īpašības:
  • Screw terminals top side for supply by cables.Load connection bottom side by screw terminals for cables.
  • AC-type for the detection of AC residual currents.
  • Width = 2 modules
  • Fitted with a test button, to be used frequently to check the tripping of the residual current function.This device complies with substance-restriction requirements and has been designed in an environmentally conscious process.Protected against solid bodies larger than 12,5mm ("fingerproof"): IP20 according to IEC/EN 60529 standard.
Ieteikums / ierobežojums
  • This product should be installed in compliance with installation rules, preferably by a qualified electrician. Incorrect installation and/or incorrect use can lead to risk of electric shock or fire.Before carrying out the installation, read the instructions and take account of the product's specific mounting location.Do not open up, dismantle, alter or modify the device except where specifically required to do so by the instructions. All Legrand products must be opened and repaired exclusively by personnel trained and approved by Legrand. Any unauthorised opening or repair completely cancels all liabilities and the rights to replacement and guarantees.Use only Legrand brand accessories.

Produkta priekšrocības

Ierīkošanas priekšrocības
  • Fitted with DIN rail clamps, on top side and on bottom side to facilitate the installation on the DIN rail.
Priekšrocības, izmantojot
  • Fitted with a label holder allowing a clear, visible and convenient identification of the circuit.On and OFF indication printed on the handle respectively on red and green backgrounds for an easy identification of the status of the RCCB

Tehniskie parametri

Number of poles 2
Rated voltage 230 V
Rated current 100 A
Rated fault current 0.03 A
Rated insulation voltage Ui 250 V
Rated impulse withstand voltage Uimp 4 kV
Mounting method DIN rail
Leakage current type AC
Selective protection No
Short-time delayed tripping No
Short-circuit breaking capacity (Icw) 10 kA
Surge current capacity 0.25 kA
Voltage type AC
With interlocking device Yes
Frequency 50 Hz
Additional equipment possible Yes
Degree of protection (IP) IP20
Width in number of modular spacings 2
Built-in depth 44 mm
Ambient temperature during operating -25-60 °C
Pollution degree 2
Connectable conductor cross section multi-wired 0.75-35 mm²
Connectable conductor cross section solid-core 0.75-50 mm²
RAL-number (similar) 7035
Explosion-proof No
Width 35.6 mm
Height 94.8 mm
Depth 77.8 mm
Degree of impact strength (IK) IK04
Storage temperature -40-70 °C
Electric supplying direction By the top or bottom
Terminal marking indication No
Stress test conformity (1000V) Yes
Colour Grey
Halogen free Yes
Connection type Screwed terminal , Busbar and cable
Label space/information surface Yes

Dokumentācija

2 documents
Tehniskā lapa
F01316EN-03.pdf pdf (0.73 Mo)
Lietošanas pamācība
LE03774AB.pdf pdf (1.99 Mo)
1 dokuments
Autocad 3D
411505.dwg dwg (0.16 Mo)
5 documents
Sertifikāti
NF-NF012_3245 (0.18 Mo)
Sertifikāti
VDE-40032163 (0.51 Mo)
Vides profils
LGRP-00366-V02.01-EN.pdf pdf (0.64 Mo)
Sertifikāti
AENOR-030/002247 (0.82 Mo)
Sertifikāti
IZVĒLIETIES DARBĪBU