Logo print

title
title

Contactor CX³ with front face handle 2 pole - 63A - 250V~ - 2 NO contacts with 230V~ coil - 2 modules

CX³ Legrand

Contactor CX³ with front face handle 2 pole - 63A - 250V~ - 2 NO contacts with 230V~ coil - 2 modules

REF. 412547 EAN numurs. 3245064125475

2 Normally Open contacts. Enables to control energy intensive loads such as heating, lighting, swimmingpool pump

Lejupielādēt produktu
26,64 € / Piece
Ieteicamā cena Bez PVN
Jūs varat salīdzināt tikai 4 produktus, lai pievienotu šo produktu, jums ir jānoņem 1.

Pamatapraksts:

2 Normally Open contacts. Enables to control energy intensive loads such as heating, lighting, swimmingpool pump

Produkta īpašības:
  • Utilization category : AC7a or AC1 - 63A / AC7b or AC3 - 30A
  • Can be equipped with auxiliaries reference 412431
  • Conform to IEC/EN 61095
  • 230V~ coil
  • Handle can be accessed after removing blanking plate.
Ieteikums / ierobežojums
  • This product should be installed in compliance with installation rules, preferably by a qualified electrician. Incorrect installation and/or incorrect use can lead to risk of electric shock or fire.Before carrying out the installation, read the instructions and take account of the product's specific mounting location.Do not open up, dismantle, alter or modify the device except where specifically required to do so by the instructions. All Legrand products must be opened and repaired exclusively by personnel trained and approved by Legrand. Any unauthorised opening or repair completely cancels all liabilities and the rights to replacement and guarantees.Use only Legrand brand accessories.

Produkta priekšrocības

Ierīkošanas priekšrocības
  • Easy integration: fitted with two DIN rail clamps, one top side and one bottom side to ease the clipping. Allows the insertion of prong busbar at the top side.
Priekšrocības, izmantojot
  • Equipped with a front face handle to get the possibility to also control it on-site directly on the device itself (test and repair function). Permanent ON or OFF wihout automatic reset.Also Fitted with a label holder allowing a clear, visible and convenient identification of the circuit.

Tehniskie parametri

Rated operating voltage 250-250 V
Rated operation current 63 A
Rated excitation voltage 195-253 V
Voltage type (operating voltage) AC
Voltage type (excitation voltage) AC
Number of contacts as normally open contact 2
Number of contacts as normally closed contact 0
Max. incandescent lamp load 8000 W
Max. load fluorescent lamp 4700 VA
Max. load fluorescent lamp (Duo circuit) 5000 VA
Max. load fluorescent lamp (parallel compensated) 1700 VA
Slider for hand switch Yes
Width in number of modular spacings 2
Built-in depth 44 mm
Additional equipment possible Yes
Degree of protection (IP) IP2X
Width 68 mm
Height 94 mm
Depth 35.6 mm

Dokumentācija

1 dokuments
Tehniskā lapa
F01333EN-01.pdf pdf (0.35 Mo)
1 dokuments
Autocad 3D
412545.dwg dwg (0.14 Mo)
3 documents
Sertifikāti
VDE-40034227 (0.4 Mo)
Sertifikāti
NF-NF012_3114 (0.55 Mo)
Sertifikāti
OC / CB-FR_712933 (0.41 Mo)
IZVĒLIETIES DARBĪBU