Logo print

title
title
title
title

Circuit breaker DPX3 160,4 poles, with rated current of 25A and thermal magnetic protection.

DPX3 160 Legrand

Circuit breaker DPX3 160,4 poles, with rated current of 25A and thermal magnetic protection.

REF. 420205 EAN numurs. 3245064202053

Moulded circuit breaker for control isolation and protection of low voltage lines. Protects a circuit from damage caused by excess current from an overload or short circuit.

Lejupielādēt produktu
317,02 €
Ieteicamā cena Bez PVN
Jūs varat salīdzināt tikai 4 produktus, lai pievienotu šo produktu, jums ir jānoņem 1.

Pamatapraksts:

Moulded circuit breaker for control isolation and protection of low voltage lines. Protects a circuit from damage caused by excess current from an overload or short circuit.

Produkta īpašības:
  • Breakink capacity of 50kA, according to EN/IEC standard 60947-2, suitable for protection of commercial and middle power installations.Rated insulation voltage of 800VRated impulse withstand voltage of 8kV
  • Compliat with NEMA AB‐1.Climatic condition according to IEC/EN 60947-1 Annex Q, Cat. F subject to temperature,humidity, vibration, shock and salt mist.
  • Protection unit with rotary knobs for regulation of thermal current, fixed magnetic current.Thermal protection with manual adjustment range of 0,8-1,0 of the rated current.Magnetic protection fixed at 10 time the rated current (minimum of 400A).
  • Can be equipped with releases (undervoltage and shunt releases) and auxiliary contacts.Can used with rotary handles or motor operator.Locking accessories are available.
  • Has diffent type of possible connection accessories: cage terminals, spreader and rear terminals.Is available also in a plug-in version (circuit breaker fitted with special terminals and mountedon a plug-in base).

Produkta priekšrocības

Ierīkošanas priekšrocības
  • DPX3 platform has been developed to give a new solution ofprotection devices for a more precise approach in "flux" installations inorder to offer the correct answer little panel builders or installers.
Priekšrocības, izmantojot
  • DPX3 platform provide a complete "flux" approach in premiummarket segment, for usually reduced value projects and a Fit & Forget approach offering direct sale distribution
Unikālas īpašības
  • DPX3 160 is the answer for the competition for reduced needs of Flux sub-segment. Possibility of DIN mounting and full accessory range.

Tehniskie parametri

Rated permanent current Iu 100 A
Rated voltage 220-690 V
Rated short-circuit breaking capacity lcu at 400 V, 50 Hz 25 kA
Overload release current setting 80-100 A
Adjustment range short-term delayed short-circuit release 500-1000 A
Adjustment range undelayed short-circuit release 500-1000 A
Device construction Built-in device fixed built-in technique
Integrated earth fault protection No
Type of electrical connection of main circuit Screw connection
Suitable for DIN rail (top hat rail) mounting Yes
DIN rail (top hat rail) mounting optional Yes
Number of auxiliary contacts as normally closed contact 1
Number of auxiliary contacts as change-over contact 1
With switched-off indicator Yes
With integrated under voltage release Yes
Number of poles 3
Position of connection for main current circuit Front side
Type of control element Toggle
Complete device with protection unit Yes
Motor drive integrated No
Motor drive optional Yes
Degree of protection (IP) IP30

Dokumentācija

4 documents
Montāžas rokasgrāmata
Tehniskā rokasgrāmata
Lietošanas pamācība
Y4263F.pdf pdf (0.91 Mo)
Tehniskā lapa
1 dokuments
Autocad 3D
420209.dwg dwg (0.18 Mo)
4 documents
Sertifikāti
Vides profils
LGRP-00570-V01.01-EN.pdf pdf (0.65 Mo)
Vides profils
LGRP-00733-V01.01-EN.pdf pdf (0.96 Mo)
Sertifikāti
OC / CB-71485 (2.57 Mo)
IZVĒLIETIES DARBĪBU