Logo print

title
title

Remote trip head isolating switch DX3-IS 4 pole 100A

DX3 Legrand

Remote trip head isolating switch DX3-IS 4 pole 100A

REF. 406546 EAN number. 3245064065467

Isolating switch to control and isolate the installation. Remote tripping with associated control auxiliary (shunt trip, undervoltage release).

Laadige toode alla
236,78 € / Tükk
Soovitatav hind Ilma käibemaksuta
Saate võrrelda ainult 4 toodet, selle lisamiseks peate eemaldama 1 toote.

Peamine kirjeldus:

Isolating switch to control and isolate the installation. Remote tripping with associated control auxiliary (shunt trip, undervoltage release).

Toote omadused:
  • Rated current 100 A Category of use AC-23ARated voltage 400V~
  • Can be supplied either by copper cable, prong busbar (top side or bottom side).
  • Can be equipped with Legrand DX3 auxiliaries and accessories.
  • Protected against solid bodies larger than 12,5mm ("fingerproof"): IP20 according to IEC/EN 60529 standard.
  • This device complies with substance-restriction requirements and has been designed in an environmentally conscious process.
Soovitus / piirang
  • This product should be installed in compliance with installation rules, preferably by a qualified electrician. Incorrect installation and/or incorrect use can lead to risk of electric shock or fire.Before carrying out the installation, read the instructions and take account of the product's specific mounting location.Do not open up, dismantle, alter or modify the device except where specifically required to do so by the instructions. All Legrand products must be opened and repaired exclusively by personnel trained and approved by Legrand. Any unauthorised opening or repair completely cancels all liabilities and the rights to replacement and guarantees.Use only Legrand brand accessories.

Toote eelised

Paigaldamise eelised
  • Fitted with DIN rail clamps, on top side and on bottom side to facilitate the installation on the DIN rail. Fitted with auxiliary screwless terminals for the supply of control circuits. Wiring capacity: 0.75 … 2.5 mm² without ferrule, 0.75 … 1.5 mm² with ferrule. Copper cables only.
Eelised kasutamisel
  • Fitted with a label holder allowing a clear, visible and convenient identification of the circuit. Visual identification of the actual status of the contacts : red indicator (closed position) / green indicator (open position).
Ainulaadsed omadused
  • Auxiliary screwless terminals for a convenient and safer connection of auxiliary circuits.

Tehnilised omadused

Version as main switch Yes
Version as maintenance-/service switch Yes
Version as safety switch Yes
Version as emergency stop installation Yes
Version as reversing switch No
Max. rated operation voltage Ue AC 415 V
Rated operating voltage 48-415 V
Rated permanent current Iu 100 A
Rated permanent current at AC-21, 400 V 100 A
Rated short-time withstand current lcw 1 kA
Rated operation power at AC-23, 400 V 40 kW
Number of poles 4
Number of auxiliary contacts as normally closed contact 0
Number of auxiliary contacts as normally open contact 0
Number of auxiliary contacts as change-over contact 3
Motor drive optional Yes
Motor drive integrated No
Voltage release optional Yes
Device construction Complete device in housing
Suitable for floor mounting Yes
Suitable for front mounting 4-hole Yes
Suitable for front mounting centre No
Suitable for distribution board installation Yes
Suitable for intermediate mounting No
Colour control element Red
Type of control element Toggle
Interlockable Yes
Type of electrical connection of main circuit Screw connection
Degree of protection (IP), front side IP20

Dokumentatsioon

2 dokumendid
Kasutusjuhend
LE03603AG.pdf pdf (1.79 Mo)
Tehniline leht
F01555EN-00.pdf pdf (0.41 Mo)
1 dokument
Autocad 3D
406546.dwg dwg (0.29 Mo)
1 dokument
Sertifikaadid
OC / CB-IT-22484 (0.15 Mo)
VALIGE TEGEVUS