Logo print

title
title

Circuit breaker DPX3 160,4 poles, with rated current of 160A and thermal magnetic protection.

DPX3 160 Legrand

Circuit breaker DPX3 160,4 poles, with rated current of 160A and thermal magnetic protection.

REF. 420086 EAN number. 3245064200868

Moulded circuit breaker for control isolation and protection of low voltage lines. Protects a circuit from damage caused by excess current from an overload or short circuit.

Laadige toode alla
206,14 € / Tükk
Soovitatav hind Ilma käibemaksuta
Saate võrrelda ainult 4 toodet, selle lisamiseks peate eemaldama 1 toote.

Peamine kirjeldus:

Moulded circuit breaker for control isolation and protection of low voltage lines. Protects a circuit from damage caused by excess current from an overload or short circuit.

Toote omadused:
  • Breakink capacity of 25kA, according to EN/IEC standard 60947-2, suitable for protection of commercial and middle power installations.Rated insulation voltage of 800VRated impulse withstand voltage of 8kV
  • Compliat with NEMA AB‐1.Climatic condition according to IEC/EN 60947-1 Annex Q, Cat. F subject to temperature,humidity, vibration, shock and salt mist.
  • Protection unit with rotary knobs for regulation of thermal current, fixed magnetic current.Thermal protection with manual adjustment range of 0,8-1,0 of the rated current.Magnetic protection fixed at 10 time the rated current (minimum of 400A).
  • Can be equipped with releases (undervoltage and shunt releases) and auxiliary contacts.Can used with rotary handles or motor operator.Locking accessories are available.
  • Has diffent type of possible connection accessories: cage terminals, spreader and rear terminals.Is available also in a plug-in version (circuit breaker fitted with special terminals and mountedon a plug-in base).

Toote eelised

Paigaldamise eelised
  • DPX3 platform has been developed to give a new solution ofprotection devices for a more precise approach in "flux" installations inorder to offer the correct answer little panel builders or installers.
Eelised kasutamisel
  • DPX3 platform provide a complete "flux" approach in premiummarket segment, for usually reduced value projects and a Fit & Forget approach offering direct sale distribution
Ainulaadsed omadused
  • DPX3 160 is the answer for the competition for reduced needs of Flux sub-segment. Possibility of DIN mounting and full accessory range.

Tehnilised omadused

Rated permanent current Iu 125 A
Rated voltage 220-690 V
Rated short-circuit breaking capacity lcu at 400 V, 50 Hz 36 kA
Overload release current setting 100-125 A
Adjustment range short-term delayed short-circuit release 1250-1250 A
Adjustment range undelayed short-circuit release 1250-1250 A
Device construction Built-in device fixed built-in technique
Integrated earth fault protection No
Type of electrical connection of main circuit Screw connection
Suitable for DIN rail (top hat rail) mounting Yes
DIN rail (top hat rail) mounting optional Yes
Number of auxiliary contacts as normally closed contact 1
Number of auxiliary contacts as change-over contact 1
With switched-off indicator Yes
With integrated under voltage release Yes
Number of poles 3
Position of connection for main current circuit Front side
Type of control element Toggle
Complete device with protection unit Yes
Motor drive integrated No
Motor drive optional Yes
Degree of protection (IP) IP30

Dokumentatsioon

4 dokumendid
Kokkupaneku juhend
Tehniline juhend
Kasutusjuhend
Y4220F.pdf pdf (0.84 Mo)
Tehniline leht
1 dokument
Autocad 3D
420087.dwg dwg (0.16 Mo)
5 dokumendid
Sertifikaadid
OC / CB-71483 (2.58 Mo)
Sertifikaadid
Keskkonnaprofiil
LGRP-00720-V01.01-EN.pdf pdf (1.02 Mo)
Sertifikaadid
OC / CB-71479 (2.53 Mo)
Keskkonnaprofiil
LGRP-00544-V01.01-EN.pdf pdf (0.61 Mo)
VALIGE TEGEVUS